Improve Your Home Comfort in every Room while Saving Energy
Finally – Easy to Use Solution for Year-Round Climate Control Down to Specific Rooms
Everybody experienced firsthand that drafty room, the too hot bedroom in the summer months, and the other summer and winter temperature imbalances that come when the air in your home isn’t smoothly flowing.
This problem has been around as long as heating and cooling home systems have been – until now.
Their goal is to have you come home from a day of stress to unwind, play, and relax. If you’re looking for the ultimate in-home comfort, SmartCocoon can certainly help. Their smart climate system gives you complete control over your home’s airflow, so the temperature in every room is always just right.
By installing a SmartCocoon device in the problematic area, you gain complete control of your home’s airflow. SmartCocoon’s Smart Register Booster Fan can be easily installed into your existing vent, syncs up to your conventional or smart thermostat, and is easily controlled using a mobile app.
SmartCocoon was designed to address all the pain points of current uneven airflow that cause discomfort in different rooms of the house.
In most 2-story houses in North America, there are one or two rooms that don’t follow the thermostat settings, and no matter what you do they’re always either too hot in the summer or freezing in the winter and no matter how you adjust the thermostat and close off vents it doesn’t seem to help.
Always Adjusting Thermostat
Constantly adjusting your thermostat at home to keep everyone comfortable, affects your energy consumption, monthly bills, and HVAC equipment, not to mention the continuous disagreements between the members of your home.
By changing the temperature your heat pump and furnace must work harder to adjust to the fluctuating changes. As a result, your energy bill goes up and it causes extra wear and tear and maintenance bills because the equipment is working so hard.
It’s hard to always make sure your kids and pets are staying comfy – not too cold and not too hot; making them comfortable is essential for a good night’s sleep and your peace of mind.
How SmartCocoon Works
SmartCocoon Smart Register Booster Fan is installed under the vent grill, and is best used in the rooms that need airflow improvement, and works towards your comfort all year round. Once it’s set up, it automatically connects to your existing smart and even non-smart thermostats, syncs itself with your heating and cooling system using its proprietary AI algorithm.
Then it draws the trapped air in the ducting system based on the user requirements and environmental properties – and it does that in a very smart way. Using multiple ranges of sensors, it detects when the room is falling behind the set thermostat temperature. Based on its four different operating modes it then turns on to blow (warm or cool) air to balance the airflow to a comfort level of your liking.
Unlike the other solutions out there, SmartCocoon smart booster fans can actually control the airflow imbalance instead of just monitoring it. They act as the arms and legs of your thermostat and heating and cooling system (HAVC) to make sure everyone enjoys their desired comfort in their rooms.
Their booster fans come with a special slide-out spring that can be easily and safely installed and once plugged in, it will only take 2-3 minutes to set up using the mobile app and… You’re all set to enjoy the comfort experience.
To install your device first remove your existing vent grill. Wipe or vacuum inside the vent before installation. Slide-out the brackets and place your smart register booster fan inside the vent.
*In the majority of US and Canadian residential buildings, there are usually accessible plugs within a couple of feet to where vents are usually located.
The next step is to install and set up the mobile app.
SmartCocoon uses an A.I. algorithm that controls the unit. Their algorithm allows the device to actively and intelligently boost and control the airflow in sync with the main heating and cooling (HVAC) system and creates desired comfort for each room.
A 2-fan system saves 30% on HVAC consumption, on average. One fan can increase the overall efficiency of the ducting system by 11%.
Whether or not you have a smart thermostat, you can use SmartCocoon. The device automatically connects to your existing smart or traditional thermostat, syncs itself with your heating and cooling system using its proprietary AI algorithm.
Available on Android and iOS
SmartCocoon can be controlled by your iPhone or Android device, ensuring you can customize your home comfort based on your unique needs. Their easy-to-use app allows you to control several units at the same time.
Using the SmartCocoon app, you can easily set your desired temperature for any room (area) in your house and set the mode to auto, eco, on, or off;
ON/OFF: keeps the fan always on/off no matter if the main (heating and cooling) system is working or not.
eco: turns the fan “ON” only when the main HVAC system is working, making it the most energy-efficient mode.
Auto: defines setpoints for each individual room. In this mode, the fan works only if the main (heating and cooling) system is working and also if the room temperature is not meeting the temperature you set.
- Low Profile Engineering
- SmartCocoon comes in 3×10 and 4×10. The fans used in this device are heavy-duty/ industrial grade fans designed for a minimum of 50,000 hours of operation. The fans can generate a maximum of 120 CFM (only 29 dBa st the default RPM).
- The device needs to be plugged into the nearest power outlet in the room.
- SmartCocoon’s noise level is lower than the whispering level.